Posts mit dem Label iot werden angezeigt. Alle Posts anzeigen
Posts mit dem Label iot werden angezeigt. Alle Posts anzeigen
2021-10-17

Update: Display TTN-Gateway status

›
After migrating my TTN gateway to the new  The Things Stack Community Edition (see previous  blog post ) my script to display the gateway st...

Migrate TTN-Gateway to The Things Stack Community Edition (aka V3)

›
 I just migrate my TTN-gateway to the new The Things Stack Community Edition (aka V3).  I followed the instructions I found in the thread o...
2020-10-12

Photovoltaic dashboard with Grafana

›
I have a SolarEdge Inverter which is monitored by a energy meter (SolarEdge SE-MTR-3Y-400V-A). The energy meter gets measurements from the i...
2020-04-19

A 3d printable case for a ZigBee Gateway

›
I create a 3D model of a case for the ZigBee board.   In the cap is a cutout to place a neodymium magnet. STL files are uploaded t...
2020-01-03

TTN-Gateway in a box

›
During the last days I worked on the installation of my TTN-Gateway into a case. This is the result: Beside the LoraWAN hardware...
2019-12-29

Raspi + RAK831 + converter board - make standard i2c bus available

›
The RAK831 converter board connects the standard i2c pins of the Raspi with the RAK831 board (RASPI.PIN3 -> RAK.PIN7, RASPI.PIN5 -> RA...
2019-12-03

Setting up a Zigbee2mqtt gateway

›
Here are the steps I performed to setup a Zigbee2mqtt gateway using a CC2530+CC2591 board and a RaspberryPI 3. My RaspberryPI 3 is running...
12 Kommentare:
2019-10-08

Setup TTN Gateway using Raspi3 with RAK831 and converter board

›
Finally I was able to put my TTN Gateway into operation. The first attempt a few month ago failed and therefore the project was on hol...